GreenWorks Tools RCS36-23lgs Manuel D'utilisation page 19

EN
FR DE ES IT PT
SPECIFICATIONS
24V DC
Rated voltage
2.4m/s
No Load Speed
254 mm
Guide bar length
< 2s
Chain stop
50 ml
Chain oil tank capacity
Weight
(with 2Ah battery pack)
Max 2.74kg ( without guide bar and saw chain )
(with 4Ah battery pack)
Max 3.14kg ( without guide bar and saw chain )
Battery Pack 29807/29837
Charger 29817/29827
Emission sound
80.4dB(A)
pressure level L pA
3.0dB(A)
Uncertainty K pA
Sound power level L wA
94.1dB(A)
Guaranteed sound
97dB(A)
power level L wA(G)
Vibration total value ah 2.5m/s
Uncertainty K 1.5m/s
wA
REMARKS:
The declared vibration value has been measured with
a standard test method and may be used to compare
one tool with another.
The declared vibration value may be used in a
preliminary assessment of exposure.
WARNING
The actual vibration values during use of the tool can
be different from the above stated and depend on the
use of the tool; and the need to identify safety measures
to protect the operator are based on an estimation of
exposure in the actual conditions of use (taking account
all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in ad-
dition to the trigger time).
RCS36-23lgs manual.indd 16
NL SV DA NO FI HU CS RU
English
CHAIN & BAR INFORMATION
20097T
Manufacture
Oregon
Tri-link
Oregon's chain must be fitted with Oregon's bar; Tri-
link's chain must be fitted with Tri-link's bar.
DESCRIPTION
1. Guide bar cover
2. Front handle guard
3. Front handle
4. Safety lock-off button
5. Switch trigger
6. Oil tank cover
7. Oil level gauge
8. Spike bumpers
9. Saw chain
10. Guide bar
11. Nuts
2
12. Rear handle
2
13. Chain tensioner adjustment knob
14. Sprocket cover
15. Sprocket cover tighten knob
16. Bolt for saw chain tension
17. Sprocket
18. Bar guide
19. Oil outlet
20. Bar groove
21. Chain drive links
22. Cutter
23. Felling direction
24. Danger zone
25. Escape route
26. Direction of fall
27. Notch
28. Felling back cut
29. Hinge
30. Limb cut
31. Keep work off ground leave support limbs until log is
32. Log supported along the entire length
33. Cut from top (over buck) avoid cutting earth
34. Log supported one end
35. Under buck
16
RO PL SL HR ET
Saw chain
91PJ040X
JL9D-1X40
cut
LT LV SK BG
Guide bar
124MLEA041
M1431245-1041HL
2010/12/30 3:14