Craftea RITUAL REMIXED Ultimate Tea Maker Livret D'instructions page 19

The CRAFTEA™ Ultimate Tea Maker™ is designed for zero
maintenance and with you, the CRAFTers' ease of use in
mind. In the unlikely event that you encounter any problems,
please refer to the following below.
Error Code
1
2
3
4
5
6
7
8
9
10
Problem
Internal circuitry
overheated
Over or Under Voltage
Internal circuitry turned
off to protect device
from power surge
The brewing vessel
was removed during
operation
Heating mechanism
has overheated
Heating
mechanism error
Stirrer not detected
Stirrer jam
No water added
Heating for +15
minutes
Turn off device. Allow
cooling. Resume operation.
Check cord, power strip/surge
protector and wall outlet for
proper connections and electrical
rating. Contact an electrician if
you cannot solve this problem.
Turn off machine. Allow cooling.
Resume operation
Place brewing vessel back on
base and resume operation.
Turn off machine. Allow cooling.
Resume operation.
Turn off machine. Allow cooling.
Resume operation.
Securely affix the stirrer by
"clicking" it into place.
Turn off device. Allow cooling.
Pour out contents from brewing
vessel. Carefully remove the
stirrer. Clear jam.
Add water and resume operation.
Turn off machine. Allow cooling.
Resume operation.
Solution
19