Instructions
(After confirming setting, machine may take a moment to update!)
1.Turn on your CRAFTEA™ Ultimate Tea Maker™.
Beeps upon start up and again before step 2.
a. Be sure to plug the device into a surge
protector to protect device electronics.
b. Operate device in open area leaving room to
vent steam above the device and vent heat from
the base bottom and back.
2. Inset stirrer. (Flashes confirm button) Confirm.
Beeps once upon confirmation.
a. The stirrer will rotate when the machine is in
operation to speed up infusion, reducing
steep time.
b. The stirrer will magnetically couple to the shaft;
however, it is not fully affixed until it clicks
into place.
c. The machine will not operate unless the stirrer is
properly secured.
14
Insert Stirrer
<- Herbal Tea ->
Select Program