Qlima SRE3230TC Manuel D'utilisation page 71

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
THE INFORMATION DISPLAy
The information display  not only serves as an indicator of the (set) time and
temperature (sections C, E, and F), it also indicates any malfunctioning of the
heater. The code on the information display tells you what is the matter:
Code
Information
The heater has been automa-
Time
tically turned off by a power
----
cut or bad connection.
An earthquake (magnitude 5
or more), strong vibrations or
a shock will ensure that the
E01
heater automatically
turns off. (The safety system
against shocks has worked).
The heater has been automa-
tically turned off after a fault
E02
or during ignition or due to
E03
the presence of water or dust
in the fuel filter or in the
fixed tank.
An increase in ambient
temperature has turned the
E07
heater off. (The tempera-
ture monitoring system has
worked).
The heater has been automa-
tically turned off because the
hot air stream, the ventila-
Filter
tor or the ventilator filter
E09
is blocked or hindered by
Filter
something. (The safety system
against overheating has
worked).
The heater has been turned
off in a closed space. (The
E13
safety system against incom-
plete combustion has wor-
ked).
The heater has automatically
The ON indica-
stopped because the ON / OFF
tor flashes. Err
button was kept pressed in or
lights up
was blocked.
Poor functioning. Heater
F00 – F30
needs maintenance
Action
Restore power or restore the
connection. Press the ON /
OFF key
again.
21
Make sure there are no com-
bustible materials around the
heater, or fuel leakages. Press
the ON / OFF key
again.
21
Remove the water and the
dust in the fixed tank. Clean
the fuel filter (see chapter L).
Press the ON / OFF button
again.
Ventilate the space. Let the
heater cool off. Press the ON /
OFF button
again.
21
Remove obstacles from the
ventilator opening. Clean the
ventilator filter (see chapter
L) Press the ON/OFF button
again. If the problem oc-
21
curs again after taking the
above measures, contact your
dealer.
Ventilate the space and press
the ON / OFF button
again.
21
Ensure the space is sufficien-
tly ventilated.
Remove obstacles from the
ventilator opening. Clean the
ventilator filter (see chapter
L) Press the ON/OFF button
again. If the problem oc-
21
curs again after taking the
above measures, contact your
dealer.
Note the messages displayed
and turn the heater off. Con-
tact your dealer.
4
71
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sre3531tcSre3631tc

Table des Matières