Standard Equipment; Standard Accessories; Data Plate - IPC TWOCK-H D1341Pi Manuel D'instructions

INTRODUCTION
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
First of all, we wish to congratulate you on choosing our machine that,
thanks to its design concept and the quality of the materials used, will
not fail to give you total satisfaction for a long time to come.
In order to get the most from your purchase and to prevent errors from
being made during use, please carefully read and follow the instructions

STANDARD EQUIPMENT

1. WATER INLET
2. FIRST WATER OUTLET
3. SECOND WATER OUTLET
4. DESCALE LIQUID TANK
5. STAINLESS STEEL WATER TANK
6. FUEL TANK
7. MAGNETOTHERMIC SWITCH
8. STEAM VALVE
9. DETERGENT VALVE
10. PRESSURE GAUGE
11. THERMOSTAT
12. MAINS INDICATOR
13. LOW FUEL-LEVEL INDICATOR
14. PUMP ON INDICATOR
15. BURNER ON INDICATOR
16. EMERGENCY STOP SWITCH
17. FLAME CONTROL MECHANISM
18. SAFETY THERMOSTAT
19. LOW DESCALING LEVEL INDICATOR

STANDARD ACCESSORIES

1. HIGH PRESSURE HOSE
2. AUTOMATIC SPRAY GUN
3. FIXED PART OF LANCE
4. MOBILE PART OF LANCE
5. WATER NOZZLE

DATA PLATE

WARNING !
• Make sure that the identification label is fitted to the machine at the
moment of the purchase.
• If there is no plate, inform the manufacturer and/or the dealer
immediately. Machines without a plate must not be used and the
manufacturer declines all responsibility for them.
• Products without a plate must be considered anonymous and po-
tentially dangerous.
English
contained in this manual.
Our sales and assistance service, specialised in providing technical
help at all times, will not fail to offer you efficient assistance both during
and after the guarantee period.
DESCRIPTION OF SYMBOLS
1. RISK OF BURNS
2. DO NOT DIRECT THE JET
- 10 -