PREPARING THE INSTALLATION OF THE DEVICE
Installation guidelines
- This device was designed to be installed in residential premises. In any
other case, please call your distributor.
- Installation must comply with the standards currently enforced in the
country of use.
- The device must be supplied with 230V single-phase 50Hz.
- In damp areas such as bathrooms and kitchens, you must install the
connection box at least 25cm above the floor.
Keep the device away from any draughts that may interfere
with its operation (e.g.: under a centrally controlled fan, etc...).
Do not install the devise just under a fixed socket.
Installation
50
25
50
25
12
50 cm
25 cm
Volume 1 No electrical device
Volume 2 Class II IPX4
Comply with the minimum distances
from any furniture units when posi-
tioning the device.
Do not install a shelf above vertical
devices.
To optimize the absence detection of
your device, avoid installing it in a closed
corner or behind a piece of furniture.
28