Programming - GE RAK149P2 Manuel Du Propriétaire Et Instructions D'installation

Programming

Factory Programming Settings
The programmable thermostat comes preprogrammed with
the following schedule:
MONDAY MORN 6:00
through HEAT 70 F HEAT 62 F HEAT 70 F HEAT 62 F
SUNDAY COOL 78 F COOL 85 F COOL 78 F COOL 82 F
Setting the time and day of the week
The time and day of the week must be set for the program
schedule to operate correctly.
1. Slide the Function switch to the Off
position.
2. Press the Hold button
in for 6 seconds.
3. Press the
the time in hours. Press
the Hold button once. Now press
the or
the time in minutes.
4. Press the Hold button while
the time is displayed. The display
shows the day currently set on
the thermostat (01 = Monday,
02 = Tuesday, etc.).
5. Press the
week.
6. Press the Hold button to go to the programming schedule
or slide the Function switch to Cool or Heat positions to
lock the values into memory.
49-5000517 Rev. 3
DAY 8:00
AM AM
or button to adjust
button to adjust
or button to set the current day of the
EVE 6:00 NITE
PM
:
PM
OFF
:
PM
:
TODAY
PM
10:00
PM
13