Installation; Mounting The Pdu - Tripp-Lite PDUMH15AT Manuel De L'utilisateur

3. Installation

3.1 Mounting the PDU

The PDU supports 1U Rack configurations.
Note: The user must determine the fitness of hardware and procedures before mounting. The PDU and
included hardware are designed for common rack and rack enclosure types and may not be appropriate for
all applications. Exact mounting configurations may vary.
3.1A
1U Rack Mounting: Attach the
PDU to the rack by inserting four user-
supplied screws
mounting brackets
holes of the rack rail as shown.
3.1B
Wall or
Mounting: Remove the screws
the mounting brackets to the PDU, change
the orientation of the brackets as shown and
reattach the brackets. Use only the screws
supplied by the manufacturer or their exact
equivalent (#6-32, 1/4" flat head). Attach
the PDU to a stable mounting surface by
inserting two or more user-supplied screws
through the PDU mounting brackets
A
and into secure points on the mounting
surface.
21-02-124 933E0A.indb 4 21-02-124 933E0A.indb 4
through the PDU
A
and into the mounting
B
3.1C
Under-Counter
attaching
C
B
B
3.1A
B
3.1B
C
C
3.1C
4
A
C
A
C
B
A
3/25/2021 2:19:06 PM 3/25/2021 2:19:06 PM