Product Overview; Using The Tool; Intended Use - Pattfield PE-1400 KS Traduction De La Notice Originale

Product overview

1
Safety release lever
2 Upper blade guard
3 Saw blade clamp washer
4 Lower blade guard
5
Work clamp
6 Base plate
7 Table extension rail
8 Mounting hole
9
Mitre scale & indicator
10 Rotary table
11 Straight guide
12 Saw blade
13 Saw arm
14 Spindle lock lever
15 Rotary table handle
16
Rotary table locking knob
17 Straight guide locking screws
18 Rear extension rail
19 Bevel lock knob
20
Release knob
21 Dust port
22 Transportation handle
23 On / off switch
BEFORE USE
1 Insert the extension
base plate
screwdriver.
Fix the tool at the 4 mounting
on a workbench by use of 4 screws (not
included).
86 EN
PKS210_Kappsäge_Content_V1.0_13-10-11.indd 86
All manuals and user guides at all-guides.com
rails 7 & 18 into the
6 and secure them with a
holes 8

Using the tool

1. Place the workpiece against the straight
guide 11 on the tool.
2. Attach the work clamp 5
Adjust the work clamp 5
secure the workpiece on the saw table.
3. Do not cut workpieces which are too
small to be securely clampled by the work
clamp 5. Long pieces may require extra
support.
4. Set the desired mitre and/or bevel angle.
5. To switch on the tool, press and hold the
on / off switch 23.
6. Start working, when the tool is at maxi-
mum speed. Hold the tool firmly at the
saw arm 13 and press the safety release
lever 1. Slowly push the tool downwards
through the workpiece.
7. To switch off the tool, release the on / off
switch 23.
Caution! Do not overheat the blade
tips of the saw blade.

INTENDED USE

The tool is intended for sawing mitre (-45° to
+45°) and/or bevel (0° to 45°) cuts in firmly
supported solid wood materials. The tool is not
intended for commercial use.
Any other use (e.g. abrasive wheels) or modi-
fication to the tool is considered as improper
use and could cause considerable dangers.
The pre-installed saw blade is intended for
use with wood only!
2 Attach the dust bag to the dust
port 21.
Never use the tool without the dust
bag attached.
to the saw table.
in its height and
14.10.13 16:24