Safety Instructions - Pattfield PE-1400 KS Traduction De La Notice Originale

Safety Instructions

WARNING! When using electric tools
basic safety precautions should always
be followed to reduce the risk of fire, electric
shock and personal injury including the follow-
ing:
Read all these instructions before attempting
to operate this product and safe these instruc-
tions.
Safe operation
1. Keep work area clear
- Cluttered areas and benches invite inju-
ries.
2. Consider work area environment
- Do not expose tools to rain.
- Do not use tools in damp or wet loca-
tions.
- Keep work area well lit.
- Do not use tools in the presence of flam-
mable liquids or gases.
3. Guard against electric shock
-Avoid body contact with earthed or
grounded surfaces (e .g. pipes, radiators,
ranges , refrigerators).
4. Keep other persons away
- Do not let persons, especially children,
not involved in the work touch the tool or
the extension cord and keep them away
from the work area.
5. Store idle tools
- When not in use, tools should be stored
in a dry locked-up place, out of reach of
children.
6. Do not force the tool
- it will do the job better and safer at the
rate for which it was intended.
7. Use the right tool
- Do not force small tools to do the job of a
heavy duty tool.
- Do not use tools for purposes not intend-
ed: For example do not use circular saws
to cut tree limbs or logs.
8. Dress properly
- Do not wear loose clothing or jewellery,
they can be caught in moving parts.
- Non-skid footwear is recommended
when working outdoors.
82 EN
PKS210_Kappsäge_Content_V1.0_13-10-11.indd 82
All manuals and user guides at all-guides.com
- Wear protective hair covering to contain
long hair.
9. Use protective equipment
- Use safety glasses.
- Use face or dust mask if working opera-
tions create dust.
10. Connect dust extraction equipment
- If the tool is provided for the connection
of dust extraction and collecting equip-
ment, ensure these are connected and
properly used.
11. Do not abuse the cord
- Never yank the cord to disconnect it from
the socket.
- Keep the cord away from heat, oil and
sharp edges.
12. Secure work
- Where possible use damps or a vice to
hold the work. It is safer than using your
hand.
13. Do not overreach
- Keep proper footing and balance at all
times.
14. Maintain tools with care
- Keep cutting tools sharp and clean for
better and safer performance.
- Follow instruction for lubricating and
changing accessories.
- Inspect tool cords periodically and if
damaged have them repaired by an au-
thorised service facility.
- Inspect extension cords periodically and
replace if damaged.
- Keep handles dry, clean and free from oil
and grease.
15. Disconnect tools
-When not in use, before servicing and
when changing accessories such as
blades bits and cutters, disconnect tools
from the power supply.
16. Remove adjusting keys and wrenches
- Form the habit of checking to see that
keys and adjusting wrenches are removed
from the tool before turning it on.
17. Avoid unintentional starting
- Ensure switch is in "off" position when
plugging in.
18. Use outdoor extension leads
- When the tool is used outdoors, use only
14.10.13 16:24