Installing Windows - ASROCK 985GM-GS3 FX Mode D'emploi

ATX 12V Power Connector
(4-pin ATX12V1)
(see p.2 No. 2)
2 . 9 2 . 9 Driver Installation Guide Driver Installation Guide
2 . 9 2 . 9 2 . 9 Driver Installation Guide Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 0

2 . 1 0 Installing Windows

2 . 1 0 Installing Windows Installing Windows Installing Windows
2 . 1 0 2 . 1 0 Installing Windows
Vista Vista Vista Vista Vista TM TM TM TM TM 64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions
If you want to install Windows
your SATA / SATAII HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2 . 1 1 2 . 1 1 2 . 1 1 Installing Windows Installing Windows Installing Windows Installing Windows
2 . 1 1 2 . 1 1 Installing Windows
Vista Vista Vista Vista Vista TM TM TM TM TM 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
If you want to install Windows
on your SATA / SATAII HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.11.1 Installing Windows 2.11.1 Installing Windows 2.11.1 Installing Windows 2.11.1 Installing Windows 2.11.1 Installing Windows
F F F F Functions unctions unctions unctions
unctions
If you want to install Windows
functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
Configuration.
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
ASRock 985GM-GS3 FX / 985GM-S3 FX
Please connect an ATX 12V
power supply to this connector.
® ® ® ® ® 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
7 / 7 64-bit / Vista / Vista
® TM
® ® ® ® ® 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
7 / 7 64-bit / Vista / Vista
® TM
® ® ® ® ® XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® XP / XP 64-bit on your SATA / SATAII HDDs without RAID
Advanced screen
XP / XP 64-bit OS on your system.
®
TM TM TM TM TM / / / / /
64-bit / XP / XP 64-bit on
TM
TM TM TM TM TM / / / / /
64-bit / XP / XP 64-bit OS
TM
Storage
Motherboard
2 3 2 3
2 3 2 3 2 3