Installing Windows - ASROCK M3A785GM-LE/128M Mode D'emploi

2.11.2 Installing Windows

2.11.2 Installing Windows 2.11.2 Installing Windows
2.11.2 Installing Windows 2.11.2 Installing Windows
RAID F RAID F RAID Functions RAID F RAID F unctions unctions unctions unctions
If you want to install Windows
SATAII HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
Using SATA / SATAII HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [AHCI].
STEP 2: Install Windows
®
Insert the Windows Vista
to boot your system, and follow the instruction to install Windows
Vista TM 64-bit OS on your system. When you see "Where do you want to install Windows?
" page, please insert the ASRock Support CD into your optical drive, and click the "Load
Driver" button on the left on the bottom to load the AMD AHCI drivers. AMD AHCI drivers
are in the following path in our Support CD:
.. \ I386 (For Windows
.. \ AMD64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
2 6 2 6 2 6
2 6 2 6
ASRock
Vista Vista Vista
Vista Vista
® ® ® ® ® TM TM TM TM TM
® TM
Vista or Windows
Advanced screen
® Vista TM / Vista TM 64-bit OS on your system.
Advanced screen
® TM TM
Vista / Vista 64-bit OS on your system.
TM ® TM
/ Windows Vista 64-bit optical disk into the optical drive
® TM
Vista OS)
® Vista TM 64-bit OS)
® Vista TM / Windows
M3A785GM-LE/128M
/ Vista / Vista / Vista 64-bit Without 64-bit Without 64-bit Without
/ Vista / Vista 64-bit Without 64-bit Without
TM TM TM TM TM
® TM
Vista 64-bit on your SATA /
Storage Configuration.
Storage Configuration.
® TM
Vista / Windows
® Vista TM 64-bit optical disk into
Motherboard
®