Features; Assembly - RIDGID R2740 Manuel D'utilisation

FEATURES

PRODUCT SPECIFICATIONS
Belt Size ..........................................................3 in. x 18 in.
Sanding Surface ............................................... 17.5 sq. in.
No Load Speed ...................................... 400 - 950 ft./min.
kNOW YOUR BELT SANDER
See Figure 1, page 14.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BELT TENSION RELEASE LEVER
The tension release lever aids in quick and easy belt
changes.
DUST BAG
The dust bag attaches to the sander and keeps dust to a
minimum.
ERGONOMIC DESIGN
The design provides for easy handling. It is designed for
comfort and ease of operation in different positions and at
different angles.

ASSEMBLY

UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
Variable Speed Belt Sander
Dust Collection Bag
Sanding Belt
Operator's Manual
Input ...............................120 V, 60 Hz, AC only, 6.5 Amps
Net Weight .............................................................. 5.8 lbs.
LOCk-ON BUTTON
The lock-on feature allows you to lock the switch trigger in
the ON position. Locking the switch trigger on allows you to
operate the sander for extended periods of time.
SWITCH TRIGGER
To turn the sander ON, depress the switch trigger. Release
switch trigger to turn your sander OFF.
TRACkING SCREW
The tracking screw allows you to easily adjust the belt
tracking.
VARIABLE SPEED CONTROL DIAL
The variable speed control feature allows the sander to
develop a no load speed that can be adjusted from 400
to 950 feet/min. by rotating the dial from A (slowest) to F
(fastest).
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
7 - English