Maintenance And Storage; Battery Maintenance - EGAmaster 58775 Manuel D'instructions

ATTENTION:
One-year periodic recalibration is necessary to maintain accuracy.
Please contact your local dealer for calibrations.
CAUTION:
1. Over-torquing (110% of Max. torque range) could cause breakage or lose of accuracy.
2. Do not shake violently or drop wrench.
3. Do not use this wrench.
4. Do not leave this wrench in any place exposed to excessive heat, humidity, or direct
sunlight.
5. Do not use this apparatus in water. (It is not waterproof).
6. If the wrench gets wet, wipe it with a dry towel as soon as possible. The salt in seawater
can be especially damaging.
7. Do not use organic solvents, such as alcohol or paint thinner when cleaning the wrench.
8. Keep this wrench away from magnets.
9. Do not expose this wrench to dust or sand as this could cause serious damage.
10. Do not apply excessive force to the LCD panel.
11. Apply torque slowly and grasp the center of the handle. Do not apply load to the end of the
handle.
1. When the wrench is not going to be used for an extended period of time, remove the
batteries.
2. Keep a spare battery on hand when going on a long trip or to cold areas.
3. Do not mix battery types or combine used batteries with new ones.
4. Sweat, oil and water can prevent a battery's terminal from making electrical contact. To
avoid this, wipe both terminals before loading a battery.
5. Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.
44

MAINTENANCE AND STORAGE

BATTERY MAINTENANCE