Kyocera DF-650 Manuel D'utilisation page 24

English
1
2
3
1-20
Paper Jam in the Coupling Section
If the illustration shown displays on the
operation panel of your copier, there is a
paper jam in the coupling section between
the Document Finisher and your copier.
Open the upper cover and remove the
jammed paper.
If the jammed paper cannot be easily
removed, proceed to the next step.
If the optional Hole Punch Unit is installed,
ensure the arrow on the adjustment dial
points somewhere between the grooves on
the main body of the Hole Punch Unit.
Grasp the front cover handle and open the
front cover.
Turn the conveyor knob (G1) to feed the
paper further along to enable easy removal.
Remove the paper.
If the jammed paper cannot be easily
removed, proceed to the next step.
DF-650(B), MT-1(B), BF-1(B), PH-4(A) AND PH-4(C) OPERATION GUIDE