Bluetooth Pairing; Technical Specification; Subwoofer - Sharp HT-SBW800 Mode D'emploi

8
• Some 4K HDR TVs require the HDMI input or picture settings to be set for
HDR content reception. For further setup details on HDR display, please
refer to the instruction manual of your TV.
I can't fi nd the Bluetooth name of this unit on my Bluetooth device for

Bluetooth pairing

• Ensure the Bluetooth function is activated on your Bluetooth device.
• Ensure you have paired the unit with your Bluetooth device.
This is a 15 mins power off function(ERPII standard requirement for
saving power).
• When the unit's external input signal level is too low, the unit will be
turned off automatically in 15 minutes. Please increase the volume level
of your external device.
The subwoofer is idle or the indicator of subwoofer does not light up.
• Please unplug power cord from the mains sockect, and plug it in again
after 4 minutes to resent the subwoofer.
75mm
Technical specifi cation
Model
Soundbar
Power Supply
Power Consumption
Power Consumption StandBy
Output Power
Frequency Response

Subwoofer

Power Supply
Power Consumption
Power Consumption StandBy
Output Power
Frequency Response
Bluetooth
Version
Maximum power transmitted
Frequency bands
Remote Control
Battery Type
Power Adapter
Manufacturer:
Model name:
Input:
Output:
4,3kg
KG
1200mm
HT-SBW800
DC 23,0V
6 x 25W (8Ω) + 50W (4Ω) (RMS)
120Hz - 20KHz
AC 220-240V ~ 50/60Hz
180 W (3Ω) (RMS)
40Hz - 120Hz
2402 MHz ~ 2480 MHz
AAA (1,5V X 2)
Zhong Shan City Richsound Electronic Industrial Ltd.
AC 220-240V ~ 50/60Hz 3,5A Max
DC 23,0V
5,8kg
KG
105mm 240mm 240mm
⎓
3A
35 W
<0,5W
35 W
<0,5W
V 4.2
5 dbm
RAD2304
⎓
3A
415mm