resideo Braukmann DS06 Mode D'emploi

Braukmann
DS06 Low Lead Content
Dial Set Pressure Regulating Valves
APPLICATION
®
The DS06 Dial Set Pressure Regulating Valve is a high
quality pressure regulating valve that maintains a
constant outlet pressure over a wide range of inlet
supply pressures. It is suitable for potable water and
irrigation applications. The downstream pressure
adjustment dial eliminates the need for a pressure
gauge when adjusting the pressure setting (static
pressure only).
SPECIFICATIONS
Model: DS06 Dial Set Pressure Regulating Valves.
Construction Materials:
Body: Bronze.
Internal Parts: Stainless steel and engineered plastics.
Regulator Mechanism: Fabric-reinforced diaphragm.
Seat Design: Balanced single seat construction.
Inlet Pressure (Maximum): 250 psi maximum.
Reduced Pressure Range:
25 to 90 psi (1/2 in. to 2 in.).
Outlet Pressure: Factory set at 60 psi (414 kPa).
Dial Calibration: ± 4 psi.
Differential: 14.5 psi minimum (inlet to outlet).
Fluid Temperature (Maximum):
Air: 140° F (60° C).
Water: 140° F (60° C).
INSTALLATION INSTRUCTIONS
Ambient Temperature Range: 33° F to 140° F (1° C to
60° C).
Pipe Sizes Available: 1/2 in., 3/4 in., 1 in., 1-1/4 in.,
1-1/2 in. and 2 in. available.
Connections:
Can be configured as female thread-by-thread,
single- or double-union, NPT threaded or sweat.
Low Lead Content: < 0.25% Lead.
Gauge Tap: 1/4" NPT.
Approvals:
ASSE 1003-2009 Certified.
CSA: B356-10 and IAPMO Listed.
INSTALLATION
When Installing this Product...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a
hazardous condition.
2. Check the ratings given in these instructions and
on the product to make sure the product is
suitable for your application.
3. Installer must be a trained, experienced service
technician.
4. After installation is complete, check out the
product operation as provided in these
instructions.
33-00014EF-08