Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
1 INTRODUCTION
The KPA-11 professional clamp series provides many functions for professional DC / AC current and voltage
measurements, including resistance, capacitance and diode test, continuity, temperature and many more. Its
large back-lit screen allows you to perfectly visualize the measurements in the places of less visibility. With its
tear-shaped clamp allows easy handling in places where there is little space. Its design and specifications make
it especially suitable for industrial applications. These are some of its main characteristics:
-
AC/DC Voltage
-
AC/DC Current
-
Resistance
-
Capacitance
-
Frequency
-
Continuity
-
Diode
-
Temperature
-
Hz/%
-
Auto Power OFF
-
Data Hold
-
Peak Hold
-
Backlight LCD display
2 SAFETY
2.1 International Safety Symbols
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages may be pre-
sent
Double insulation
2.2 Safety notes
-
Do not exceed the maximum allowable input range of any function.
-
Do not apply voltage to meter when resistance function is selected.
-
Set the function switch OFF when the meter is not in use.
-
Remove the battery if meter is to be stored for longer than 60 days.
2.3 Warnings
-
Set function switch to the appropriate position before measuring.
-
When measuring volts do not switch to current/resistance modes.
-
Do not measure current ton a circuit whose voltage exceeds 600V.
-
When changing ranges always disconnect the test leads from the circuit under test.
KPA-11T
TRMS CLAMP METER
24 / 46
Publicité
Table des Matières
