Fontana Forni Forno Italia d'extérieur Série Manuel D'installation Et D'utilisation page 7

INSPECTION
OBSERVATION: To facilitate the flue draft, it is a good idea to connect a flue
with an inclination of at least 15°. As can be seen in the drawing, it is advisable
to avoid connections with a 90° connecting curve
10
ELECTRICAL CONNECTION
ELECTRICAL CONNECTION
INFORMATION REGARDING THE ELECTRICAL FIELD IS PROVIDED BELOW, WHICH
MUST BE STRICTLY FOLLOWED. OTHERWISE ALL LIABILITY SHALL BE DENIED BY
INFORMATION REGARDING THE ELECTRICAL FIELD IS PROVIDED
THE COMPANY.
BELOW, WHICH MUST BE STRICTLY FOLLOWED. OTHERWISE ALL
LIABILITY SHALL BE DENIED BY THE COMPANY.
• Check that the rated mains voltage is compatible with the oven's operating
requirements.
• Before making the connection, check the efficiency of the grounding system.
• Check that the rated mains voltage is compatible with the oven's
Grounding is mandatory by law.
operating requirements.
• All changes that might be required in this field must be made by expert and
• Before making the connection, check the efficiency of the grounding
authorised personnel.
system. Grounding is mandatory by law.
• All changes that might be required in this field must be made by
expert and authorised personnel.
MAINS POWER
SUPPLY
MAINS POWER SUPPLY 230VAC
MAINS POWER SUPPLY 230VAC
TRANSFORMER
CAUTION. THE POWER LINE
MUST BE PROTECTED AND BE
SUITABLY RATED.
XL
TERMINALS 230 VAC LINE
X1
TERMINALS FAN - LIGHT
LIGHT/FAN
FAN
LIGHT
OVEN FAN OVEN LIGHT
11
11