Publicité
Les langues disponibles
Les langues disponibles
What to do if...
LIGHT DOES
NOT COME ON
LIGHT COMES ON FOR
ONLY A FEW SECONDS
LIGHT STAYS ON
OR
LIGHT COMES ON
RANDOMLY
Call for customer service and/or missing or damaged parts (800-334-6871)
Is there power to the fixture?
• Has the house circuit breaker tripped?
• Is the wall switch ON?
Is the bulb(s) plugged or screwed in completely?
• Is the bulb(s) good?
(Be careful not to overtighten)
Is the light sensor able to determine darkness?
• Cover light sensor with electricianʼs tape. Wait 2-3
min. to see if light turns on. If it does, the sensor
is receiving too much light.
Is the wiring to the unit loose?
TURN OFF POWER BEFORE CHECKING
Is the light sensor sensing reflected light?
• Cover light sensor with electricianʼs tape. Wait 2-3
min. to see if light turns on. If it does, fixture is
receiving reflected light. Partially cover the light
sensor to block out the reflected light.
Is the light sensor in a shaded area?
• Shine a flashlight into the light sensor for 2-3 min.
If the light turns off, the fixture is mounted in an
area that does not allow enough light to enter the
light sensor.
Is the light sensor good?
• Shine a flashlight into the light sensor for 2-3
min. If the light does not turn off, the light sensor
is bad. Contact customer service.
4
Publicité
