Alternating Between Celsius; Recalling Stored Data - GERATHERM GT-101 Mode D'emploi

R AR
ALTERNATING BETWEEN
°C AND °F
To switch the display between °C and °F, sim-
ply turn OFF the unit, then press and hold the
START button for 5 seconds; after 5 seconds,
the current measurement scale ("°C" or "°F"
icon) will be flashing on the display.
Now switch the measurement scale between °C
and °F by pressing the START button. After you
have selected the desired measurement scale,
wait for 5 seconds and the unit will automatically
enter the "ready for measuring" mode.

RECALLING STORED DATA

This thermometer can recall the last 30 read-
ings.
1. Press START when the power is off. The
memory icon "M" will flash.
2. Press START again to recall the last reading.
3. Press START repeatedly to recall the last 30
readings in succession.
NL PT ES IT
27
FR EN DE