Table des Matières
Publicité
Dual Voltage
Black
12 VDC
Red
White
Green
(Polarity Free)
Insert
Spring
Screw Cap
1. Remove the screw cap,
take out spring and insert.
MDS100
If it is necessary to cut a hole in the frame, mounting tabs may be required to
strengthen the installation. Mounting tabs not provided with fire-rated models.
Red & Black: 12 VDC
White & Black: 24 VDC
2. Reverse the insert.
CAUTION
CAUTION
Overheated or burnt coils caused
by incorrect voltage/wire harness
combinations will not be covered
under warranty
White
24 VDC
Green
Black
Red
(Polarity Free)
3. Replace the insert, spring
and screw cap.
24 VDC
NOTICE
Factory default setting is Fail-Secure.
NON-FIRE RATED MODELS ONLY
Publicité
Table des Matières
