Q&A - EVGA SuperNOVA T2 Serie Manuel D'utilisation

Q&A
Q: I see there are more than 4 screw holes
screws, are some missing?
A: Nothing is missing; you will only need to attach the EVGA power supply to the case with 4 screws. The power
supply offers more than (4) holes to
Q: My EVGA Power Supply includes (2)
A: Motherboards only require (1) 4+4 or 8-Pin EPS
connection on the motherboard may be found for
motherboard support dual 4+4-Pin EPS connections, please refer to your
details on the proper function and power if the EPS connections.
Q. What is the ECO Thermal Control
A. The ECO Thermal Control
during low to moderate operation loads. The EVGA power supply's fan will
needed, based on the temperature the power supply reaches. The fan will also increase in RPM when needed,
based on the load operation being requested from the components connected. This prevents unnecessary
rotation, reduces ambient noise
not required.
Please Note: If the ECO Thermal Control is disabled the fan will always spin, even at low loads. The fan will also
increase in RPM as needed automatically, based on the power draw from attached components.
Q. What if I want to use
A. EVGA always recommends the use of
card(s), motherboard connections and other auxiliary power connections for optimal power distribution.
which end of the cable
Q. Does it matter
A: Yes, the connections going to the power supply, will not have "break downs" like the EPS (CPU) has 4+4 on one
side and full 8-Pin on the other. Another example is the 24-Pin cable, you can see on the PSU side it is a total of
28 Pins, where the 24-Pin connection will go to the motherboard directly.
appropriately to match the power supply side and connect only the same
supply as referenced on each connector.
Q. If I have an issue or a question, can I get support?
A: ALL EVGA products are backed by top tier warranties as well as technical support. Support can be reached for
your power supply at:
- USA: +1-888-881-3842
- Europe: +49 89 189 049 11
on the back of the power supply, but the packaging only offers (4)
provide optimal compatibility
EPS cables
System?
System, when enabled, allows the fan on your EVGA power supply to shut off
levels and will
power adapters
for my video card(s)/motherboard/peripherals?
direct power connections
I plug into the power supply?
option 1, option 3. or contact us via email at support@evga.com.
or by email via eu.evga.com/support.
750W / 850W / 1000W / 1200W TITANIUM
for today's varied case designs.
for my motherboard, do I need to connect up both?
connection, on some models, an additional 4+4-Pin or 8-Pin
dual CPU configurations or for
increase the life span
from the power supply to power the video
5
Power Supply User Manual
extreme overclocking. If your
motherboard manufacturer's manual
automatically turn back on
of the fan due to the fan not spinning when
Check each cable as it is labeled
''matching" cable directly to the power
for
when
English