Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
If the total number of heating unit of the appliance you
choose is not less than 4, the appliance can be connected
directly to the mains by single-phase electric connection, as
shown below.
If the cable is damaged or to be replaced, the operation must
be carried out the by after-sale agent with dedicated tools to
avoid any accidents.
If the appliance is being connected directly to the mains an
omnipolar circuit-breaker must be installed with a minimum
opening of 3 mm between contacts.
The installer must ensure that the correct electrical connection
has been made and that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by
authorised technicians only.
32
V.2
Publicité
Table des Matières
