MaxLite WallMaxx WP-OP Serie Mode D'emploi page 4

Operating Instructions
MaxLite WallMax™ Open Face
®
Photocell Diagram
Black White Green
(L) (N) (G)
Driver
Neutral
1. The Red wire (Photocell) connects to Black wire (Driver AC)
2. The White wire (Photocell) connects to White wire (Driver AC) and White N (Main Power)
3. The Black wire (Photocell) connects to Black L (Main Power)
4. Green wire (Driver AC) connects to Green G (Main Power)
PIR Occupancy Sensor Wiring Diagram
Non-Dimming
Load
Note: For additional information on the occupancy sensor see:
https://www.maxlite.com/products/analog-sensors-stand-alone
© Copyright 2020. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
Black
White Red
Green
White
AC
Black
Load
(Red)
Violet
Gray
Black
Photocell
Dim (+)
Violet
Dim (-)
Gray
WP-OP Series
Dimming
Load
Load
(Red)
Black
Page: 4
REV: 01/14/20