Publicité
Les langues disponibles
Les langues disponibles
1. Remove existing M14 bolts from attachment holes., 1 at the end of the frame rail and one
2. Scrape frame rails to remove any caulk near the attachment holes.
on the outside of the frame rail forward of the exhaust hanger. Scrape frame rails to remove
any caulk near the attachment holes. Keep for re-installation.
3. Raise hitch into position and re-install the M14 fasteners removed in the previous step.
4. Tighten all M14 fasteners with torque wrench to 115Lb.-Ft. (156N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2015 Cequent™ Performance Products, Inc. - Printed in Mexico
Sheet 7 of 21
36587NP
10-9-15
Rev. B
Publicité
