Sanyo SGP-M2 Manuel D'installation page 38

7. USING A VIBRATION-RESISTANT FRAME
A vibration-reduction frame must be used if the unit is installed in locations where noise and vibration can
be a problem, such as on rooftops above living spaces or conference rooms. If a vibration-resistant frame
is used, be sure to install steady braces or other support, and take measures to prevent applying exces-
sive force to the refrigerant tubing.
When anchoring the refrigerant tubing, place the tubing anchor at least 1.5 m away from the outdoor unit,
as shown in Fig. 21.
When installing the vibration-resistant frame, refer to the instruction manual provided by the manufacture
of the vibration-resistant structure.
Vibration-resistant frame Tubing anchor
At least 1.5 m
Fig. 21
GB - 38