CONTROLS/ADJUSTMENTS
The L100 Classic 75 has front-panel adjustments that let you balance the
levels of the midrange driver (MF) and tweeter (HF) relative to the woofer.
You can use these controls to adjust the speaker's sound according to
your room's acoustics, or your personal taste. The "0dB" default position
is a good place to start. Whatever sounds best to you in your room is the
right setting.
As with most speakers, after you start playing the L100 Classic 75 it will
take the drivers' suspensions several weeks to "break in" and achieve
optimum performance. During this period, the balance between the
woofer, midrange, and tweeter may change, so we recommend that you
adjust the midrange and tweeter controls again after the break-in period.
NOTE: There is a protective plastic film on the front control panel label that may be removed.
CARING FOR YOUR SPEAKERS
• Wipethecabinetwithaclean,dryclothtoremovedust.Dampclothsorcleaningpapermaydullthecabinet's
finish.
• Donotusevolatileliquidssuchasbenzene,paintthinner,alcohol,etc.,onthecabinet.Donotsprayinsecticide
near the cabinet.
• Toremovedustfromthefoamgrille,useavacuumcleanersettolowsuction.
• Donotwashthegrilleinwater.
• Ifthesurfacesofthewooferandmidrangeconesbecomedusty,youcancarefullysweepthemcleanwithasoft,
dry calligraphy brush or paintbrush. Do not use a damp cloth.
• NEVERtouchanythingtothetweeterdome.
SPECIFICATIONS
Speaker Type
Low-frequency Transducer
Midrange Transducer
High Frequency Transducer
Recommended Amplifier Power
Frequency Response (-6 dB)
Sensitivity (2.83 V @ 1 m)
Nominal Impedance
Crossover Frequencies
Enclosure type
Controls
Inputs:
Dimensions (H x W x D) with grille
Weight with grille
Finishes
Speaker Stand
Front Height
Rear Height (including riser)
Width x Depth
Weight
3-way 12" (300mm) Bookshelf Loudspeaker with Stand
12-inch (300mm) Pure Pulp cone (JW300SW-8)
5-1/4 inch (130mm) Polymer-coated, Pure Pulp cone (JM125PC-8)
1-inch (25mm) Titanium dome with soft surround (JT025TI2-4)
25-200 Watts RMS
40Hz–40kHz
90dB
4 Ohms
450Hz, 3.5kHz
Bass-reflex via Flared Front-firing Port
Attenuators for MF and HF drivers
Dual Sets Gold-plated Five-way Binding Posts
25.35" x 15.37" x 14.27" (643.8 x 390.4 x 362.4mm)
63.05lb (28.6kg)
Genuine Teak Wood Veneer
JS-120
7.075" (179.7mm)
9.29" (235.9mm)
14.25" x 11.05" (362 x 280.6mm)
14.33lb (6.5kg)
7
Tweeter
Control
Midrange
Control