habitat et jardin 1536 128813 Mode D'emploi page 10

Ceiling mounted installation
The heater must be installed at least 2.4M above the floor grade
Attention: cable should not pass thought the heater
FUNCTION & OPERATION
1. PLUG the unit into a plug socket, make sure the power supply is the same as rated
2. PRESS the power switch on the back side of heater, on and off the heater.
Troubleshooting
1. If heater will not power cord is plugged into an electrical outlet, if not, plug in.
2.Check if electricity to the main fuse is working
MAINTENANCE
Attention! Careful and regular maintenance of your heater considering our instructions assume great
importance to attain a long efficient operation of your appliance.
1. Check the filthiness of the Reflector and IR-Filament at least once a month. If necessary, apply cleaning
and maintenance instructions.
2. The number of checks may be increased considering the amount of the dust in the environment.
3. Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance. In case of
deformation, consult to your technical service.
4. Check the Power Cord and Plug visually while cleaning the appliance. In case of deformation, consult to
your technical service.