Publicité
Les langues disponibles
Les langues disponibles
SENSOR DETECTING
1.5m
SENSOR AND CAMERA INSTALLATION DIAGRAM
4
90°
90°
Camera
Sensor
0.6 - 0.8m
Notice: Fix the camera in the
0.3 - 0.4m
middle of bumper on the same
The best postiton for 2 sensors
The best postiton for 4 sensors
level with sensors.
The direction of sensors
Vertical installation position to the ground.
Sloping installation position to the ground.
90°
DETECTING RANGE
Top view
Side view
DISPLAY STATUS
Distance in meters
Safety area 160 - 250 cm
Silence
Left side
Right side
Safety area 110 - 150 cm
Dang ..... Dang .....
Alarm area 50 - 100 cm
Dang ..... Dang ..... Dang
Dang .....
Danger area 30 - 40 cm
Danger area 0 - 20 cm
Dang .....
MAIN FEATURES
• One video input, one video output
• Automatic function switch
• Outer connected display with RCA plug
• Digital distance display
• Left/right obstruction display via simulation bars
• Ten-grade simulation bars for distance display
• "DangDang" alarm sound
TECHNICAL SPECIFICATIONS
• Rated voltage: DC 12V
• Operating range: DC 9~16V
• Rated current: 200~400mA
• Detecting distance: 0.2~2.5m
• Ultrasonic frequency: 40KHz
• Working temperature –30~+70ºC
ALARM MODE
INSTALLATION STEPS
1. Choose right installation position for sensors
2. Select drilling position for sensor A & D
3. Select drilling postition for sensor B & C
4. Locate the position and drill
5. Install the sensors and hide the wires
6. Install the control box
7. Connect the whole system according to the general installation diagram
INSTALLATION AND TEST
1. Adjust the directions of sensors and axial orientation, neaten the wiring
after installing the sensors.
5
Publicité
