Before Use; Temperature Selection - Taurus Alpatec TALLIN 600 Mode D'emploi

disconnected in an emergency.
- To achieve the highest efficiency from the
appliance it should be situated in a place where
the atmospheric temperature is between 12 and
32ºC.
- To achieve the highest efficiency from the
appliance and so as to be able to install the
appliance on a cold wall (an exterior wall) and
below a window. But never obstructing or cove-
ring a ventilation area.
- The appliance should work well with its wall
support attached or with its wheels attached.
- The appliance has a wall bracket (F) on which it
can be supported.
- Ensure that the appliance is properly and safely
fixed in his working position with screws. To
avoid damaging the appliance, on recommend
to use only the holes specifically made by the
manufacturer.
ASSEMBLING THE WALL BRACKET:
- The appliance has a wall bracket (F) on which it
can be supported.
- Taking into account the separation distances
mentioned above, place the wall support in the
required position and mark the drilling points on
the wall. (Fig.1).
- Drill into the wall where marked and insert the
rawlplugs.
- Place the support by matching the holes with
the rawlplugs and screw in firmly.
- Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of the
appliance.
- Fit the appliance into the wall support.
FITTING THE BASE FEET:
- To assemble the base feet, place the appliance
face down.
- Position the base feet on the body of the
appliance using the (G) screws. (Provided with
the appliance).
- Stand the appliance up again so as to check
that the base feet work properly.
INSTRUCTIONS FOR USE

BEFORE USE:

- Prepare the appliance according to the function
you wish to use:
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off switch
(A).
- Turn the appliance on, by using the on/off button
(1).
- For first time use, the screen will show as
follows:
- Select the desired temperature. Press (4) or (5).
- Select the desired program (2).
- Select the appliance function desired.
- will showed on LCD screen only the unit is
heating.
BACKLIT SCREEN
- The appliance has a backlit LCD screen to
make it easier to use.
- The screen will go into to stand by if no buttons
are pressed after one minute.
- Press any button will light the screen up again.
CLOCK AND DAY OF WEEK SETTING:
- Press (3) to select the hour. Press (4) or (5) to
select desired hour.
- Press (3) for a second time to adjust the minu-
tes, using (4) or (5)
- Press (3) again to select a day.
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
- Press (3) to confirm and finish the setting.

TEMPERATURE SELECTION:

- Chose the desired temperature using the but-
tons (4) and (5) and wait until the indicator stops
flashing.
- The adjustable temperature ranges are between
10-35ºC.