Clarity XLC7BT Mode D'emploi page 20

BLUETOOTH FUNCTIONS
XLC7BT
To use a Bluetooth enabled cell phone with your XLC7BT, you must first
pair and connect your Bluetooth cell phone(s) with the telephone base. All
XLC7BT andXLC7HS handsets can be used to make or answer calls on the
cell line. Your cell line is the telephone line associated with your cell phone
service.
Bluetooth wireless technology operates within a short range (a maximum
of approximately 30 feet). When you pair a Bluetooth cell phone to the
telephone base, place your Bluetooth cell phone closer to the telephone base
to maintain sufficient signal strength. For optimal performance, keep your
cell phone within 15 feet of the telephone base while using the cell line.
PAIR AND CONNECT YOUR BLUETOOTH-ENABLED CELLPHONE
1. Choose a slot to pair the cell phone. Press and hold Bluetooth 1 or
Bluetooth 2 on the telephone base until you hear a confirmation tone, and
the Bluetooth 1 or Bluetooth 2 light flashes.
2. Turn on the Bluetooth feature of your cell phone. Once your cell phone
finds your Clarity phone (Clarity XLC7BT), press the appropriate key on
your cell phone to continue the pairing process.
• Your cell phone may prompt you to enter the PIN of the telephone base.
The default PIN of the telephone base is 0000.
When the cell phone is connected to the telephone base, the corresponding
status icon (Bluetooth 1 or Bluetooth 2) displays. The corresponding device
light (Bluetooth 1 or Bluetooth 2) turns on.
If the pairing fails, turn off the Bluetooth feature on your cell phone and on
the XLC7BT by pressing Bluetooth 1 or Bluetooth 2. Then repeat the steps
above to pair and connect again. In some cases, it may take you a few
attempts to complete the pairing process.
PAIR AND CONNECT YOUR BLUETOOTH-ENABLED HEADSET
1. Press MENU on the phone when it is not in use. Press MENU again to select
Bluetooth.
2. Press the SUBIR or BAJAR arrow keys to scroll to Add Headset, and then
press MENU. The screen displays Search headset....
3. Set your headset to discoverable mode. Once your handset finds your
headset, press MENU to select it.
• Enter the PIN of your headset if required. The PIN for most Bluetooth
devices is 0000 (refer to the user's manual of your headset), and then
press MENU.
When the headset is successfully paired and connected to the telephone
base, the Bluetooth 2 icon displays, and the Bluetooth 2 light on the base
turns on.
E
N
G
L
I
S
H
15