Product Components - Hoover CV216RB Manuel D'utilisation

Do frequently clean the dust cup and filter assembly.
The Environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The symbol on the product indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For
more detailed information about treatment, recovery and recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased the product.
This appliance complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

A. Power Regulation Button
A1. OFF Position
A2. HARD FLOOR Position
A3. CARPET Position
B. Inner Filter
C. Sponge
D. Filter
E. Release Button
F. Dust Container
PREPARING YOU CLEANER
1. Assemble the connectors of the Ergonomic Handle and Main Unit, carefully push the wires into the
Main Unit during assembly, ensure the wires do not become trapped until it locks into position. [1]
2. For first use, charge your cleaner for 24Hrs. After first use the normal charging time is 6Hrs. [2]
3. The LED will blink when charging and keep lighting when fully charged.
NOTE: Use only the charger supplied with your cleaner to recharge.
IMPORTANT: when charging the cleaner, the Power Regulation Button must be OFF.
It is normal for the charger to become warm to touch when charging.
USING YOUR CLEANER
Turn the cleaner on by sliding the power regulation button to the following settings:
First position of the power regulation button, the agitator and nozzle LED lights are OFF [A2].
• HARD FLOOR:
Second position of the power regulation button, the agitator and nozzle LED lights are ON [A3].
• CARPET:
Charging/Power Indication *
This cleaner is equipped with a LED display. When the product is working, the display will report the
following indication:
BATTERY LEVEL INDICATOR:
• 3 points = 3/3 charge
• 2 points = 2/3 charge
• 1 point = 1/3 charge
DISCHARGE INDICATOR: When the batteries are fully discharged, the indicator will flash for around 20
seconds before cleaner turns off automatically.
G. Nozzle LED
H. LED display
I. Charge Plug
J. Charger
K. Main Unit
L. Ergonomic handle
M. Agitator cover lock
N. Agitator cover
O. Agitator
8
GB