Connecting A Vcr - Samsung PN50A760T1F Guide De Configuration Rapide

Connecting a VCR

Connecting to Video
VCR Rear Panel
Audio Cable
(Not supplied)
Video Cable (Not supplied)
Antenna Cable (Not supplied)
➢
If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the
TV. Alternatively, connect the cable to the "R" jack.
If your VCR is stereo, you must connect two cables.
➢ Each VCR has a different back panel configuration.
➢ When connecting a VCR, match the color of the connection terminal to the cable.
➢
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
Connecting to S-Video
VCR Rear Panel
Antenna Cable (Not supplied)
 2
Audio Cable (Not supplied)
S-Video Cable (Not supplied)
An S-Video cable may be included with your VCR. (If not, check your local electronics store.)
➢
Each VCR has a different back panel configuration.
➢ When connecting a VCR, match the color of the connection terminal to the cable.
TV Rear Panel
2 
TV Rear Panel
English - 5
1
2
TV Side Panel
3
4
5
1
TV Side Panel
2
3
Unplug the cable or antenna from
the back of the TV.
Connect the cable or antenna to the
ANT IN terminal on the back of the
VCR.
Connect an Antenna Cable between
the ANT OUT terminal on the VCR
and the ANT IN terminal on the TV.
Connect a Video Cable between the
VIDEO OUT jack on the VCR and
the AV IN 1 [Y/VIDEO] or AV IN 2
[VIDEO] jack on the TV.
Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN 1 (or AV IN 2) [R-AUDIO-
L] jacks on the TV.
To begin, follow steps 1–3 in the
previous section to connect the
antenna or cable to your VCR and
your TV.
Connect an S-Video Cable between
the S-VIDEO OUT jack on the VCR
and the AV IN 2 [S-VIDEO] jack on
the TV.
Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN 2 [R-AUDIO-L] jacks on
the TV.