Philips Atlantic HR3760 Mode D'emploi page 3

1 Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Warning
•
Do not touch the sharp blades when the appliance
is plugged in. If the blades get stuck, unplug the
appliance before you remove the ingredients. Be
careful when handling the sharp cutting blades,
emptying the jar and during cleaning.
•
Switch off and unplug the appliance from the
power supply before:
•
Removing it from the stand, changing
accessories or approaching parts that move
in use.
•
Assembling, disassembling or cleaning it.
•
It is left unattended.
•
Cleaning the appliance
•
If the blades get stuck, unplug the appliance
before you remove the ingredients that block the
blades
•
Do not immerse the appliance in water or any
other liquid.
•
Check if the voltage indicated on the appliance
corresponds to the local mains voltage before you
connect the appliance.
•
Do not use the appliance if power cord, the plug,
protecting cover, rotating sieve or any other parts
is damaged or has visible cracks. If the mains cord
is damaged, you must have it replaced by Philips,
a service centre authorised by Philips or similarly
qualified persons in order to avoid a hazard.
•
Make sure the blade unit is securely fastened and
the lid is properly assembled to the blender jar
before you use the appliance.
•
This appliance shall not be used by children. Keep
the appliance and its cord out of reach of children.
•
This appliance can be used by persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have
been given supervision or instruction concerning
use of the appliance in a safe way and if they
understand the hazards involved.
•
Children should be supervised to ensure that they
do not play with the appliance.
•
Be careful if hot liquid is poured into the blender
as it can be ejected out of the appliance due to a
sudden steaming.
•
Never assemble or disassemble the blender jar or
the tumbler to the motor unit while the power is
on.
•
This appliance is intended for household use only.
•
Read the cleaning procedure from "User Manual"
before use.
•
Do not operate the blender for more than 30
seconds without any ingredient. It may lead to
overheating.
•
Never let the appliance run unattended.
Caution
•
In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance
must not be supplied through an external
switching device, such as a timer, or connected to
a circuit that is regularly switched on and off by
the utility.
•
Never use any accessories or parts from other
manufacturers or that Philips does not specifically
recommend. If you use such accessories or parts,
your guarantee becomes invalid.
•
Do not exceed the maximum capacity indication
on the blender jar.
•
Do not exceed the maximum quantities and
processing times indicated in the relevant table.
•
If food sticks to the wall of the blender jar, switch
off the appliance and unplug it. Then use a spatula
to remove the food from the wall.
•
Never fill the blender jar with ingredients hotter
than 80˚C.
•
Noise level: Lc = 83 dB(A).
Blender
Warning
•
Never reach into the blender jar with your fingers
or an object while the appliance is running.
Caution
•
To prevent spillage, do not put liquid more than
the maximum capacity of the blender jar. When
you process hot liquid or ingredients that tend
to foam, do not put more than 1.8 liters in the
blender jar.
•
Do not let the appliance run for more than
3 minutes at a time. Let the appliance cool
down to room temperature before you continue
processing.
•
Always make sure the lid is properly closed/
assembled on the jar and the measuring cup is
inserted properly in the lid before you switch on
the appliance.
•
Do not use jar right after taking it out from
dishwasher or refrigerator. Let it stay at room
temperature for at least 5 min before use.
Built-in safety lock
This feature ensures that you can only switch on the
appliance if the blender jar, the mill or the tumbler is
assembled on the motor unit properly. If the blender
jar or the tumbler is correctly assembled, the built-in
safety lock will be unlocked.
Safety Feature
This blender is fitted with a safety feature which
safeguards against excessive loads. In case of
overloading, the blender automatically activates
the protection and operation will stop and the
overloading symbol E01
will light up on the
control panel. If this occurs, set the rotary knob to OFF,
unplug the appliance and allow it to cool down for
EN 7