Troubleshooting; Service Requirements - Pacvac Velo 01VE001VB Mode D'emploi

Troubleshooting

Problem Cause
Battery not properly connected to
backpack.
Battery connected to backpack while
the switch was in the ON position.
Battery pack power depleted or
Backpack not battery pack is damaged.
working
Battery pack shuts off due to
abnormally high motor temperature.
Time delay protection on switch.
Dust bag full.
Dust bag not installed correctly.
Hose not installed correctly.
Backpack
has no/poor
Blockages.
suction
Filters blocked.
Weak battery.

Service Requirements

Our products are designed and built to be functional and durable. For information on use and maintenance
please read this Product & Training Manual thoroughly.
Should you require servicing contact your nearest Authorised Pacvac Service and Warranty Agent.
Solution
Check and re-connect battery. Machine must have
two batteries inserted to operate.
Turn the switch to OFF and switch back ON after 5
seconds.
Check the charge level by pressing the power
button. Check for damage. If no sign of damage
then charge the battery.
Turn machine off and ensure hose is unblocked.
Ensure dust bag is clean. After 30 minutes the
machine should be ready for use. If not, contact an
Authorised Service and Warranty Agent.
Turn the machine to the OFF position, leave for 5
seconds and then turn it back ON.
Remove, empty and clean dust bag.
Remove and empty dust bag making sure the
rubber edging is correctly fitted around the canister.
Reconnect hose and ensure it iscorrectly sealed.
Remove hose, wand and floor tools; remove any
blockages.
Replace / clean filter.
Check the charge level by pressing the power
button. Remove the batteries and charge.
ENGLISH
13