CLAS OM 0639 Montage page 9

OM 0639
CLUTCH ASSEMBLY/DISASSEMBLY SET
6. Loosen the stop screw of the tool completely and remove
it (nuts fixing the star, star + stop screw and spacers).
7. Fit the mechanism fixing screws to the flywheel in the
fixing points used by the tool spacers (fig. 11) and tighten
to torque. Check that the previously installed screws are
tightened securely.
8. The clutch is now mounted, remove the clutch centring
device.
Fig. 8
Fig. 9
Fig. 10
Fig. 11