Haussmann CK104-MS Manuel De L'utilisateur page 14

SAFETY INSTRUCTIONS FOR METAL SHEARS
 Handle sheet metal with care. Sheet metal will have sharp edges. Wear
ANSI-approved safety goggles, heavy duty work gloves, long sleeve shirt, and
jeans when working with sheet metal.
 Maintain labels and nameplates on the tool. These carry important safety
information.
 Avoid unintentional starting. Prepare to begin work before turning on the tool.
 Do not lay the tool down until it has come to a complete stop. Moving parts can
grab the surface and pull the tool out of your control.
 When using a handheld power tool, maintain a firm grip on the tool with both hands
to resist starting torque.
 Do not leave the tool unattended when it is plugged into an electrical outlet. Turn
off the tool, and unplug it from its electrical outlet before leaving.
 This product is not a toy. Keep it out of reach of children.
 People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause
pacemaker interference or failure. In addition, people with pacemakers should:
• Avoid operating alone.
• Do not use with trigger locked on.
• Properly maintain and inspect tool prior to use, to avoid electrical shock.
• Any power cord must be properly grounded. Ground Fault Circuit Interrupter
(GFCI) should also be implemented – it prevents sustained electrical shock.
WARNING: Handling the cord on this product will expose you to lead, a chemical
known to the State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
 The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SPECIFICATIONS
 Voltage: 120 volts AC, 60 Hz
 Current rating: 4amp
 No-load speed: 0-2,500 SPM
 Max Cutting Capacity: 18 GA. Sheet Metal & 20 GA. Stainless Steel
 Head swivels 360°
14
CK104-MS
!