Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Drum loader clamps drum on ground or stacks for loading,
unloading, and transit.
Fig. 1
Lifting Capacity
Lifting Height
Front wheel Dia.
Rear wheel Dia.
Length
Heights
Lifting per stroke
Drum size
Net weight
Operation
Operator must be qualified, trained, and exhibit
caution when using lifter.
1. Drum Lifting: Move drum lifter forward aligning
clamp to drum front. Apply brake pad and pump
foot pedal slowly, raising clamp assembly until drum
top is engaged and raised.
2. Drum Transporting: After drum is raised, release
brake, and push base track frame assembly handle.
Notice: During transport it is recommended to secure
the drum in the lowest position available for safety.
3. Drum unloading: After transporting drum, slowly
release valve lever until drum is firmly grounded or
on pallet. Upper clamp will release the drum. Once
unloaded, you may release the lever.
Notice: For safety, it is recommended to slowly release
valve lever when lowering drum.
Hydraulic Drum
Transporter & Lifter
SPECIFICATIONS
Model
L
H
H1
H2
W
988929
499 kg / 1100 lbs.
500 mm / 20 in.
125 mm / 5 in.
125 mm / 5 in.
900 mm / 36 in.
1250 mm / 50 in.
880 mm / 33 in.
1380 mm / 55 in.
1020 mm / 41 in.
11.6 mm / 0.45 in.
572 mm (22.5" Diameter), 210 Lifters (55 gallon)
165 kg / 364 lbs.
Maintenance
1. Replace hydraulic fluid after first 20 hours of use
and every 300 hours afterwards.
Choose the following or a similar specification of
hydraulic fluid according to various climate conditions:
(A) L-HM68 (Equal to ISOVG68) if the environment
temperature is -5~+45°C.
(B) L-HM46 (Equal to ISOVG46) if the environment
temperature is -15~-5°C.
2
User's Manual
Publicité
Table des Matières
