Timer Programming - Xoro HRT 1285 Manuel D'emploi

Timer programming out of EPG
It is possible to set the timer out of the EPG.
To do so mark a broadcast you want to
record and press BLUE. A window opens
with the recording settings. For a simple
recording the settings made from the EPG
are enough. Eventually you should set the
time a few minutes before the broadcast
begins and after the broadcast ends.

Timer Programming

It it possible to program a maximum of 8 timers. Following options are available:
•
Timer number
•
Timer Mode
•
Wake up mode
•
Wake up channel
•
Wake up date
•
Wake up time
•
Duration
Press OK to confirm the settings. If there is a mistake in the programming there will
appear a note. If this happens check the time and date und if the channel works fine.
Press EXIT to leave the timer.
Functions
1 to 8
disabled, once, daily, weekly, monthly, yearly
disabled, channel, activated, recorder
Define the channel which will be activated on waking up
Date of wake up
Time of wake up
Define the duration of the broadcast
HRT 1285
19