Publicité
English
General safety requirements
`
`
Read these directions for use carefully before using.
`
`
Keep these directions for use where they will be
accessible for all users.
`
`
Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
`
`
The instrument must only be used by qualified
skilled employees.
Safety instructions before using
`
`
Follow the manufacturer's instructions and safety
instructions of the medium you are sampling.
`
`
Do not fill the instrument with potentially explosive
substances.
`
`
The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
Layout and function
The instrument is used for removing pourable powders
and granulates. It is made of anodised aluminium,
PTFE and stainless steel. The instrument is maintenan-
ce-free and suitable for steam sterilisation (bis 121°C).
Parts in contact with medium
Anodised aluminium
`
`
`
`
PTFE
`
`
Stainless steel 1.4301
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Safe sampling
CAUTION!
Openings with sharp edges on the instrument.
Danger of cutting.
`
`
Keep hands well away from openings with sharp
edges.
1. Turn the handle on the instrument clockwise.
2. The instrument is closed and can pierce into the
powder/granulate.
3. At the desired depth, turn the handle on the instru-
ment counter clockwise.
4. The instrument opens and the sample is filled.
5. Turn the handle on the instrument clockwise.
6. The instrument is closed and can be removed from
the powder/granulate.
7. Open the instrument and empty the sample on an
appropriate surface.
After taking the sample
1. Pull the inner tube all the way out by the handle .
2. Unscrew the tip .
3. Clean both tubes. Use the cleaning brushes (see
accessories) for the inside of tubes.
Publicité
