Led functions, PB pushbutton and RD reader
Led:
During normal working of control panel, led behave as follows:
•
Lucky 4 : L1 - L4 zones status :
•
Lucky 8 : L1 - L8 zones status :
E
•
Arming with one area:
N
G
Arming with two areas:
•
TAMPER:
•
BATTERY:
•
MAINS PRESENCE:
During programming led have a different meaning, explained in the concerned chapter
PB pushbutton:
During normal working of control panel the pushbutton PB has following use:
•
PB pushbutton:
During programming the pushbutton PB has a different function which will be explained in
concerned chapter
Proximity reader:
During normal working of control panel, reader RD has following use:
•
RD with 1 area:
RD with 2 areas:
During programming reader has a different use with will be explained in the concerned chapter
Off if the zone is quiet
Quickly blinking if the zone has been in alarm during last
arming
Slow blinking if the zone is excluded
Fix on if the zone is open
Off if the area is disarmed
Slow blinking if armed in HO or AR
Fix on if the area is armed in ON
Off if both areas are disarmed
Slow blinking if at least one area is disarmed or armed in
partial mode
Fix on if both areas are armed
Off if tamper input is balanced
Quick blinking to show an occurred alarm of tamper input
Fix on if tamper input is not balanced
Off during normal working
Blinking if the tension on battery is lower than a first pre-alarm
threshold
Fix on if the tension on battery is lower than the low battery
threshold
Off if mains supplying is missing to control panel
Fix on if mains is present to control panel
Zones exclusion/inclusion: in user-menu condition pressing
the pushbutton PB excludes/includes the zones in the system.
At system disarmed ON arms
At system armed any mode disarms
At disarmed areas, the multi-area key arms both in ON
Mono-area key arms its own area in ON
With at least one area armed in any mode, multi-area key
disarms both, mono-area own area
- 26 -