Sauder Harbor View 417586 Mode D'emploi page 35

Step 30
Push a GROMMET CAP (1P) and GROMMET (10P) into
å
the large hole in the TOP (G2).
Push four RUBBER SLEEVES (2R) over four METAL
å
PINS (1R). Insert the METAL PINS into the hole locations
of your choice in the DOOR ENDS (A and B). Set the
ADJUSTABLE SHELF (P) onto the METAL PINS.
To insert the drawers into your unit, tip the front of the
å
drawer down and drop the rollers on the drawer behind
the rollers on the unit. Lift the front of the drawer up
and slide it into the unit. Repeat this step to insert the
KEYBOARD SHELF.
25 lbs.
P
B
www.sauder.com/services
G2
60 lbs.
25 lbs.
1R
A
(4 used)
2R
50 lbs.
10 lbs.
each
30 lbs.
417586
1P
10P
40 lbs.
Page 35