Mx Onda MX-CP2395 Manuel D'instructions page 30

Table 3: For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Guidance and manufacturer's declaration - electromagnetic immunity
The MX-CP2395 is intended for use in the electromagnetic environment specified below. The customer or the user
of the MX-CP2395 should assure that it is used in such an environment.
IMMUNITY IEC 60601test
test level
Radiated RF 3 V/m 80
IEC 61000-4-3 MHz to 2.5
GHz
Compliance
level
Portable and mobile RF communications equipment should be
used no closer to any part of the MX-CP2395, including cables,
than the recommended separation distance calculated from the
equation applicable to the frequency of the transmitter.
Recommended separation distance =
=
d 1
=
d 2
3 V/m
Where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer and d is
the recommended separation distance in meters (m).
Field strengths from fixed RF transmitters, as determined by an
electromagnetic site survey,
compliance level in each frequency range.
Interference may occur in the vicinity of
equipment
marked with the following symbol:
30
Electromagnetic environment - guidance
80 MHz to 800 MHz
2 . P
800 MHz to 2,5 GHz
3 . P
a
should be less than the
b