Contact Information - Axis P14-E Serie Guide D'installation

Masquer les pouces Voir aussi pour P14-E Serie:
Table des Matières

Publicité

Australia/New Zealand
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of AS/NZS CISPR 22.
The product shall be connected using a shielded network
cable (STP) that is properly grounded.
Korea -
Japan -
この装置は、クラスA 情報技術装置です。
この装置を家庭環境で使用すると電波妨害 を引き起
こすことがあります。この場合には使用者が適切な
対策を講ずるよう要求され ることがあります。
Safety
This product complies with IEC/EN/UL 60950-1 and
IEC/EN/UL 60950-22, Safety of Information Technology
Equipment. The product shall be grounded either through a
shielded network cable (STP) or other appropriate method.
The power supply used with this product shall fulfill the
requirements for Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS) according to IEC/EN/UL 60950-1.
Photobiological Safety
AXIS P1405-LE/AXIS P1425-LE/AXIS P1427-LE: This product
fulfills the requirements for photobiological safety according
to EN 62471 (risk group 1).
Disposal and Recycling
When this product has reached the end of its useful life,
dispose of it according to local raws and regulations. For
information about your nearest designated collection point,
contact your local authority responsible for waste disposal.
In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE) is applicable in
the European Union member states. To prevent
potential harm to human health and the environment, the
product must be disposed of in an approved and
environmentally safe recycling process. For information
about your nearest designated collection point, contact your
local authority responsible for waste disposal. Businesses
should contact the product supplier for information about
how to dispose of this product correctly.
This product complies with the requirements of Directive
2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
(RoHS).
China
This product complies with the requirements of the
legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).

Contact Information

Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
Learn More!
Visit Axis learning center www.axis.com/academy/ for useful
trainings, webinars, tutorials and guides.
Support
Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response. If you
are connected to the Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database.
Search by product, category, or phrase
• report problems to Axis support staff by logging in to your
private support area
• chat with Axis support staff (selected countries only)
• visit Axis Support at www.axis.com/techsup/
Should you require any technical assistance, please contact
appropriate channels according to your AVHS license
agreement to ensure a rapid response.
English
Safeguards
Please read through this Installation Guide carefully before
installing the Axis product. Keep the Installation Guide for
further reference.
• AXIS P1405-LE/AXIS P1425-LE/AXIS P1427-LE: IR emitted
from this product. Use appropriate shielding or eye
protection.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to vibration, shocks or
heavy pressure. Do not install the product on unstable
brackets, unstable or vibrating surfaces or walls, since this
could cause damage to the product.
• Only use applicable tools when installing the Axis product;
excessive force could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
Use a damp cloth for cleaning.
• Use only accessories that comply with technical
specification of the product. These can be provided by Axis
or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself, contact
Axis or your Axis reseller for service matters.
• Use a limited power source (LPS) with either a rated output
power limited to <100 W or a rated output current limited
to <5 A.
• The product shall be connected using a shielded network
cable (STP). All cables connecting the product to the
network switch shall be shielded (STP) and intended for
their specific use. Make sure that the network switch is
properly grounded.
• This Axis product shall be used in compliance with local
laws and regulations.
• The Axis product should be installed by a trained
professional. Observe relevant national and local
regulations for the installation.
Transportation
• When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the product.
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

P1405-eP1405-leP1425-eP1425-leP1427-eP1427-le ... Afficher tout

Table des Matières