Renkforce RF-VRCAM-580HD 360 Notice D'emploi page 41

All manuals and user guides at all-guides.com
• Open the cover over the card slot (10) and the USB port (11).
• Connect the supplied USB cable to the USB port (11).
• Plug the other end of the USB cable into a USB port on a computer or a
suitable USB power supply.
• The charging indicator (8) lights up red when the battery is charging and
goes out once charging is complete.
• Unplug the USB cable when the battery has finished charging.
• Replace the cover over the card slot (10) and the USB port (11).
• The operating time of one battery charge is approx. 90 minutes.
• The power indicator (4) flashes when the battery needs to be recharged. In
addition, an acoustic warning signal sounds.
If the battery runs out during a video recording, the Action Cam will
save the recording and switch off automatically.
34