Installing The Lift And Putting It Into Operation; Installing The Shelf - Häfele 633.25.006 Instructions D'utilisation

2.6 Installing the lift
and putting it into
operation

2.7 Installing the shelf

24
• Check completeness and condition of scope of delivery.
• If parts are missing, please contact the manufacturer.
• If parts are damaged, please contact the manufacturer. Do not install lift with
defective parts.
• Dispose of packaging materials in accordance with national regulations.
WARNING
Risk of electrocution if the equipment is installed with the mains plug
inserted!
Always disconnect the power when installing the lift!
> Never connect the mains plug of the lift to the socket during the
installation.
Please pay attention to the following during installation:
• Do not omit any delivered parts.
• Do not install any parts that are not approved by the manufacturer.
Installation is illustrated on the basis of an example installation. The individual
installation position and the individual connection of the components must be
adjusted to the customer-specific conditions.
The installation instructions are all in the form of pictures.
• Install the lift as shown in the picture instructions. Adhere to the specified
installation order.
For picture instructions "Installing and starting up the lift" see picture
section 1 to 10 from page 62 onwards.
WARNING
Risk of electrocution if the equipment is installed with the mains plug
inserted!
Always disconnect the power when installing the shelf!
> Before starting installation, disconnect the power plug of the furniture
item / the lift and disconnect all other connections.
• Install the shelf (crossbar) as shown in the picture instructions. Adhere to the
specified assembly sequence.
For picture instructions "Installing the shelf", see picture section 4 on
page 65.