Screw, M6 X 20; Part #517.48; Qty. 2 - Bestop Sunrider Instructions D'installation

Section 5 Attach SRHT Attach Brackets
Step 1
Inside front edge of Hard Top
Remove
Step 1
Remove Hardtop Latch Receiver Screws
and retain for future Hardtop installation.
P8 - 52461 Rev. I 0322
Hardware
Screw,M8 X 25 Part
#598.93

Qty. 2

M8 Washer
Part #603.26
Qty. 2

Screw, M6 X 20

Part #517.48

Qty. 2
Bracket, Halo Center
Part #597.18
Qty. 1
Tools
4mm
T40
Allen Wrench
Torx Driver
Installation Instructions - Sunrider for Hardtop
Step 2
1
Step 2
1 Align the Halo Center Bracket to the Hard Top then
attach it with two (2) (Part # 517.48) Screws.
Attach the Center Halo Bracket to the Sunrider
2 using two (2) (Part #598.93) Screws and two (2)
(Part # 603.26) washers.
Page 8
2
© 2021 Bestop, Inc.