Screw, M6 X 16; Qty. 4 - Bestop Sunrider Instructions D'installation

Section 2
Attach Halo to Pivot Linkage Assembly
Step 1
Step 1
Turn the Sunrider Assembly upside down then at-
tach Halo to the Pivot Linkage Assembly using the
M6 x 1.00 x X 16 #598.92 (2 per side)
Repeat this step on the other side of the assembly.
P5 - 52461 Rev. I 0322
Installation Instructions - Sunrider for Hardtop
Hardware

SCREW, M6 X 16

Part #598.92

Qty. 4

Tools
4mm
Allen Wrench
© 2021 Bestop, Inc.
Page 5