Fig.7:Insert Pole (G&H) into Center connector (J).
Fig.8:Fix Pole (G) to Short side Support Pole (C) and Fix Pole (H) to Long side Support Poles (D&E). Put
Big Canopy (Q) onto the Big Top, do not fully spread.
Fig.9:Insert Pole (I) into Center Connector (K).
Fig.10:Fix Pole (I) to Pole (F) by using by Bolt (BB), Flat Washer (CC) and Nut (HH)
Hardware Pack used in Step 3
¢6*180"7"Stake
EE
16 PCS